VWDiesel.net The IDI, TDI, and mTDI source.

General Information => Troubleshooting => Topic started by: g-spec on November 06, 2006, 06:22:34 am

Title: Injecion lines....
Post by: g-spec on November 06, 2006, 06:22:34 am

I have a 95 TD which had a timming belt failure, so i replaced the head with a rebuilt one from a passat....had the passat injectors rebuilt since they looked like they were in better condiotion.....my problem now is the passat injectors are about 1/2 of an inch shorter than the golf ones were....so the injection lines dont match up.....
how do i know which lines i need and where would i be able to get some???
any comments appreciated
thanks
Michal

Title: Injecion lines....
Post by: g-spec on November 06, 2006, 09:27:21 am

The numbers on the injectors i have are as follows:
KCA30S44 France 155 Bar 068 130 202 E

Title: Injecion lines....
Post by: g-spec on November 06, 2006, 07:16:27 pm

Turns out that the injectors i got rebuilt cannot be used on my motor......
so i am in search of at least one injector....or 4 good ones!!!!
thanks