VWDiesel.net The IDI, TDI, and mTDI source.
General Information => Troubleshooting => Topic started by: sethyboy85 on October 17, 2006, 02:59:46 pm
-
Searched forum but asking (still searching just have other things to do)
I have this rebuilt shortblock and I don't have a HG or the ability to remove the headbolts from one of my "rebuildable" longblocks I have, however a headbolt from a Mechanical 1.6D fits in the block. so at least I know it should be 12mm but by the date can it be determined Hyd or mech?
26 06 85 on front of block
thanks
Seth
-
they switched to hydraulic sort of midway through '86 I believe... my old '86 jetta had mech lifters
I do like mech better than hyd. I could fill that thing up with my heaviest of buddy's... tow a trailer... and the acceleration was still pretty much the same :)
with the hyd... i feel the difference with just one normal sized friend.
-
hydrolic have 2 oil holes along the front of the block, mechanical only has one
This is a mechanical
http://img.photobucket.com/albums/v603/burnyourmoney/HG001.jpg
-
i would bet its mech. i had a 86 that was hyd.if its 85 and 11mm then it should be mech.
-
http://www.putfile.com/pic.php?img=3743104
picture of my block
-
Hydrolic. Notice the second oil passage on the front compared to mine?
-
Yeah looks like I thought faster than I could type, I meant to say that yeah it looks like a hyd block but figured I would post a picture just so people have a visual reference and that even though my block has an early 85 date it still is a Hyd