VWDiesel.net The IDI, TDI, and mTDI source.

General Information => Upgrades (non engine related ) => Topic started by: X@V on August 10, 2006, 05:35:09 pm

Title: MK3 cluster into MK2 (TD)
Post by: X@V on August 10, 2006, 05:35:09 pm

I have a MK3 wiring hardness with too much things on it (cruise control, A/C, alarm, etc.)

I need to know how the MK3 cluster could work on a MK2 wiring hardness. It's missing the VSS (3 wires). It's still not working!

What's missing?

Title: MK3 cluster into MK2 (TD)
Post by: RabbitJockey on August 15, 2006, 07:01:41 pm

it should work

Title: MK3 cluster into MK2 (TD)
Post by: X@V on August 15, 2006, 07:03:55 pm

A wire between E2 to D8 and it works.  :wink:

I installed the MK3 coolong system on the MK2 wiring. It's simple!

Title: MK3 cluster into MK2 (TD)
Post by: X@V on July 03, 2007, 06:54:03 pm

I have trouble

I have only 9V at the E2 to D8 junction.

When I turn the ignition switch on, the display disappear and the cluster doesn't work. The glow plugs indicator works but not the rest.

Do you have an idea?

Title: MK3 cluster into MK2 (TD)
Post by: burn_your_money on July 03, 2007, 07:48:50 pm

That's a common problem with the mk3 clusters. Try pulling up on the handbrake and seeing if the cluster works

Title: MK3 cluster into MK2 (TD)
Post by: somolovitch3 on July 08, 2007, 06:33:09 am

If that works, means there is a lack of/poor grounding at the cluster, no?