VWDiesel.net The IDI, TDI, and mTDI source.
General Information => Upgrades (non engine related ) => Topic started by: hillfolk'r on July 24, 2006, 09:45:48 pm
-
this isnt too crazy,rabbittrees is crazy,his is so thin it looks like itll break if ya breathe on it,but really its not that bad
heres max kill position
:twisted:
(http://img141.imageshack.us/img141/2116/hpim0440wl4.jpg)
heres max wuss position
:(
this is never used by me of course
(http://img68.imageshack.us/img68/5848/hpim0441zt6.jpg)
-
its awesome but i think more peopl will notice it in the idi forum. kool pin though i made one once to with good results.
-
i wonder if i should juse repost there....
-
what the hell is that?! whats it do? do i have one? im not to sure aboot this.
-
i wonder if i should juse repost there....
With videos of the thick black smoke before boost builds :twisted:
-
Let me undo this silly doubt: Does the pin actually rotate in there or what?? :oops:
-
Let me undo this silly doubt: Does the pin actually rotate in there or what?? :oops:
No, you can adjust it with excentral ones.
This LDA pin go up (without boost) down when turboboost is there.
There is a horizontal pen wich glides on the wall of the LDA. The deeper the pen going in (when the LDA is puched down by boost), the engine gets more diesel.
(http://img141.imageshack.us/img141/2116/hpim0440wl4.jpg)
hillfolk'r, The LDA is almost horizontal, (the left side offcorse, thats what i'm thinking you spotted) i dont see the benefit of a horizontal pin, it almost doenst give more diesel under boost. can you explain me this?
Greetz, Benjamin
-
I think I got it. Up and down. Not rotation!
Right?
-
correct
but you can pull your cover off and rotate it for different rates
this is a good place to maybe understand it a little better
you could say its a tapered pin,and is also offset too
this is an oldy but a goodie
http://dodgeram.org/tech/dsl/more_power/Power_ve.htm
(http://img230.imageshack.us/img230/5681/veafchw4.jpg)
-
That's what I call explicit content! :lol: :wink: