VWDiesel.net The IDI, TDI, and mTDI source.

General Information => Upgrades (non engine related ) => Topic started by: sethyboy85 on June 06, 2006, 07:07:56 pm

Title: 100m tranny in 90mm car
Post by: sethyboy85 on June 06, 2006, 07:07:56 pm

okay, i am getting a 100m flange tranny ACN for highway driving.. I also want to install a 80% shim kit so I have to make hybrid axles, I have read about them before but can't find the information now.

anybody got links or comments (greatly appreciated) on my idea?
Thanks
Seth

Title: 100m tranny in 90mm car
Post by: dubCanuck1 on June 06, 2006, 08:17:13 pm

What are you trying to accomplish? Why don't you just get some 100 mm CV's or a set of 100mm driveaxles?

Title: 100m tranny in 90mm car
Post by: sethyboy85 on June 06, 2006, 08:30:07 pm

the axles are only 10-15k miles old, is the outer cv the same size on 100m to 90m? if so I might just go out and buy new ones

Title: 100m tranny in 90mm car
Post by: dubCanuck1 on June 06, 2006, 08:32:51 pm

If they're made for the same body type, they'll be the same size. Just the inners change.

Title: 100m tranny in 90mm car
Post by: sethyboy85 on June 06, 2006, 08:39:48 pm

okay thanks

Title: 100m tranny in 90mm car
Post by: hillfolk'r on June 08, 2006, 06:22:51 pm

just so you guys know,and i called peloquin about it(their site says to call about install info using 90mm's)
they said you CAN use a 80% kit with 90mm flanges,as long as the car isnt lowered,or lowered more than maybe 1 inch max
im runnin it like that+its nice so far.....

Title: 100m tranny in 90mm car
Post by: sethyboy85 on June 09, 2006, 08:04:20 pm

Im dropped about 2+ inches...