VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: Cheesetoast on June 01, 2006, 11:23:43 pm

Title: nw shiny ccv valve, but only 1 outlet?
Post by: Cheesetoast on June 01, 2006, 11:23:43 pm

On my engine there is 2 hoses coming off the pcv vent, one from the crankcase and one that goes to the intake.  I bought the aluminum pcv filter, it  only has one inlet/outlet, should I unplug one of those 2 hoses or do I have the wrong item?

(http://members.shaw.ca/adowler3/tdengine.JPG)

Title: nw shiny ccv valve, but only 1 outlet?
Post by: Cheesetoast on June 01, 2006, 11:25:25 pm

the other option i was thinking wiht installing a T so i can plug both in.  Either that or plug the one going to the intake, but don't i need that connected?

Title: nw shiny ccv valve, but only 1 outlet?
Post by: QuickTD on June 02, 2006, 06:12:00 am

You need this one,

 http://www.stancomachine.com/CCVII.htm

You have the A4 version. If you wanted to install a "T" it would need to go on the bottom, where the filter plugs into the valve cover.

Title: nw shiny ccv valve, but only 1 outlet?
Post by: Cheesetoast on June 02, 2006, 05:50:12 pm

:x  guess i'll return it...