VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: Gator79 on April 16, 2017, 10:04:49 am
-
Does it matter if the fuel filter is above or belove the injection pump?
-
For most of the Rabbits and such that I have seen the filter is below the IP on the fender. Fuel is drawn up to the IP. Not sure about vans. I am unsure if you would have a problem mounting it above the IP. My question is where would you find the room to do that?
-
It'll be fine as long as it isn't TOO high above. If you're mounting it to the roof you might have issues.
Sent from my XT1097 using Tapatalk
-
Doesn't matter much. Once the system is full, there is as much downward pull as upward pull.
-
Have you any idea what the vacuum pull in on the inlet of the IP? I was thinking it was rather low like 3 lbs or so.
-
IDK, but I rekon it's gonna be close to the resistance of the filter, plus the height above the tank (~20" h20, which is less than 1psi, if you want to measure in negative psi).
-
I have it mounted next to downpipe on a firewall between downpipe and servo drum, as high as possible, works nicely