VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: BoostedOne on April 18, 2015, 09:18:49 am
-
I have an 82 Rabbit here, engine is out.
The harness is unmolested. I am trying to figure out where this black w grey stripe wire went??
(http://images.tapatalk-cdn.com/15/04/18/ad7737b35d92b5a620ec89b3d449dc4d.jpg)
Bentley says to the W terminal on the alternator then to black 10/6. On the same side of the connector it branches off to the upshift control unit, and the other side of the connector supposedly turns to red/black to the oil pressure unit..
(http://images.tapatalk-cdn.com/15/04/18/a39bad97ef7ada7316612fa73e5dbe9d.jpg)
However I know for a fact that didn't connect to the w terminal. This one did...
(http://images.tapatalk-cdn.com/15/04/18/48ac9ad95d1d54f15d3e03829fcadff4.jpg)
So what am I missing here? Thanks in advance!!
-
Never mind. After chasing my tail a few days I realize that when someone deleted the ac they plugged the ac compressor wire to the w terminal.
-
Ha. Well that would have been a puzzler.