VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => mTDI Mechanical TDI Conversions => Topic started by: Meilleur on March 11, 2015, 09:36:10 am

Title: M-tdi
Post by: Meilleur on March 11, 2015, 09:36:10 am

Bonjours

Je recherche un diy pour monter une pump m-tdi sur un alh .

Merci

Title: Re: M-tdi
Post by: vanbcguy on March 11, 2015, 10:53:44 am

Sorry, my french is not good enough to write... ;)

Land Rover 300TDI pump is a direct bolt on for the ALH.  Use the ALH pump sprocket and hub, and the ALH delivery valves.  That's it! Nothing to it.

Title: Re: M-tdi
Post by: Meilleur on March 11, 2015, 12:43:14 pm

ANGLAIS

Thank you for your answer. It is not a recipe with vw pump aaz ??

Title: Re: M-tdi
Post by: vanbcguy on March 11, 2015, 03:44:54 pm

There is a way to use a combination of TDI, AAZ and 1.6 pump parts to make an M-TDI pump, but the Land Rover pump is a much simpler solution as it does not require any modification.  They are somewhat commonly available on eBay in both new and used form:

http://www.ebay.ca/itm/LAND-ROVER-DISCOVERY-300-TDI-DIESEL-INJECTION-PUMP-ERR4046-WARRANTY-BOSCH-/291381853690?pt=LH_DefaultDomain_3&hash=item43d7b63dfa&vxp=mtr

Title: Re: M-tdi
Post by: vanbcguy on March 11, 2015, 05:06:38 pm

Or you may want to check this!!

http://www.vwdiesel.net/forum/index.php/topic,35507.0/topicseen.html

Title: Re: M-tdi
Post by: Meilleur on March 11, 2015, 05:18:54 pm

Thx vanbcguy ☺