VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: RunninWild on January 20, 2015, 10:33:30 pm

Title: WTB List
Post by: RunninWild on January 20, 2015, 10:33:30 pm
looking for a power steering pump/bracket for an AAZ, reservior and lines would be cool too but not necessary
glow plug relay/harness
fan relay harness
aaz compaible oil cooler
Title: Re: WTB: TDI Crank sprocket for AAZ
Post by: vanbcguy on January 21, 2015, 02:26:29 pm
The crank sprocket is available brand new for $40:

http://idparts.com/catalog/product_info.php?products_id=1649
Title: Re: WTB: TDI Crank sprocket for AAZ
Post by: RunninWild on January 21, 2015, 09:57:21 pm
Well thats good to know. Thankyou!
Title: Re: WTB: TDI Crank sprocket for AAZ
Post by: theman53 on January 21, 2015, 10:25:09 pm
http://www.ecstuning.com/Search/028105263d/?gclid=CNXElqbTpsMCFQisaQod4Z0A1A

I personally don't like ecs but cheap
Title: Re: WTB: TDI Crank sprocket for AAZ
Post by: RunninWild on January 21, 2015, 10:53:27 pm
Quote from: theman53 on January 21, 2015, 10:25:09 pm
http://www.ecstuning.com/Search/028105263d/?gclid=CNXElqbTpsMCFQisaQod4Z0A1A

I personally don't like ecs but cheap
What don't you like about them? Bad customer service or cheap parts?
Title: Re: WTB: TDI Crank sprocket for AAZ
Post by: theman53 on January 21, 2015, 11:09:48 pm
Service
Title: Re: WTB List
Post by: vanbcguy on January 23, 2015, 12:22:45 pm
Quote from: theman53 on January 21, 2015, 11:09:48 pm
Service

A lot of their parts are pretty poor too...

I had a water pump fail within 250 km that I bought from them.  It came with one of the bolts half installed.  Shoulda just sent it back, but oh well.  The bearing started creaking so I replaced it with a good one.  Serpentine belt tensioner pulley failed within 250 km as well, plus it had a casting line on the surface that cut a groove in my brand new serpentine belt.  Dipstick funnel from them cracked on installation and didn't fit the OEM dipstick properly... I have my oil heat exchanger that seems to let my oil temps get suspiciously high...

Only other parts I got from them were all brand name; I got my ARP head studs, my Peloquin LSD and my Victor Reinz windage tray/oil pan gasket.  Those were all fine.