VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: badsamracing on December 24, 2014, 06:11:24 am

Title: wanted 12mm 1.6 block and head
Post by: badsamracing on December 24, 2014, 06:11:24 am

im looking for a rebuildable 12mm mechanical 1.6 block and head or a rebuildable engine. im in az but would drive some to get it or if u are willing to ship is ok too

Title: Re: wanted 12mm 1.6 block and head
Post by: fatmobile on January 04, 2015, 05:22:09 pm

Need the crank and rods too?
 Or just looking for a good 12mm block?
 I don't have a head to go with it.

Title: Re: wanted 12mm 1.6 block and head
Post by: badsamracing on January 05, 2015, 12:14:17 pm

im intereste, let me know a price and what all u have

Title: Re: wanted 12mm 1.6 block and head
Post by: fatmobile on January 08, 2015, 10:08:34 pm

 Previous owner didn't adjust the valves right. #4 stayed slightly open and the exhaust manifold for that cylinder plugged up.
So it didn't die of a catastrophic failure.
Cylinders and pistons are worn, it needs bored.
 Had an 11m head on the 12mm block (head holes bored bigger) so it had been worked on.
 One rod area on the crank got rusty during storage, I'm not sure how much it would take to remove it or how deep it goes.
 $100 for the block, rods and crank. Plus shipping.
Not sure how to ship something like that but I'd do it.