VWDiesel.net The IDI, TDI, and mTDI source.
For Sale/Looking For => Parts for Sale/Wanted => Topic started by: RabbitJockey on October 23, 2014, 08:30:55 pm
-
look got one(or preferably 2) of the rubber hose elbows that go from the turbo to the intake on an aaz. or if you know of something else that i can use instead im all ears, i considered buying a silicone elbow reducer, but im not sure if they'll be long enough or not.
-
no one? >:(
-
I try to support geebee if possible, if he doesn't have something then I go silicone intakes. I used one of those reducing joints on the k24 and it worked out well with some cutting.
-
hmm, maybe one of those will be long enough then, the ones geebee makes are on ebay and are 65 dollars, i'll use an old paper towel roll before i spend 65 dollars on that
-
http://www.amazon.com/dp/B004OZ1Z4C/ref=sr_ph?ie=UTF8&qid=1415458541&sr=1&keywords=2%22+silicone+elbow
heres what i ended up getting, i could get 5 of these for what one mk1autohaus hose costs... im guessing that those come with the clamps and everything too, but for the price difference who cares.
-
just hours after ordering 2 of those silicone elbows, i found an original one in a box haha
-
There are two versions of the turbo to intake
t2/t3/k14/k24
Later is Ko3
I make both
we include clamps on all of our assys
GB
-
just a heads up, i got my 2" silicone elbow, it fits the k14 perfectly, but is a little loose on the intake manifold, it should seal fine though with a hose clamp, we will see.