VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: Alcaid on October 21, 2014, 03:15:45 am

Title: Holset HE200WG + Equal runner manifold + 3" downpipe for Golf/Jetta mk1 1.6TD
Post by: Alcaid on October 21, 2014, 03:15:45 am

Hi,

Anyone interested in a Golf/Jetta mk1 1.6TD 200whp setup?

 - Holset HE200WG-5cm, only a few hours of running, downpipe flange with 3" v-band - 500$
 - Custom equal runner manifold, mild steel. No cracks or anything, wrapped - 400$
 - Custom 3" downpipe, attached with 3" v-band at turbo, 2.5" v-band under car - 100$

Water cooled intake manifold not for sale unfortunately

Being sold as owner is going  for an ultra fast 200whp compound setup ;)


Here with an earlier HE221W turbo:
(http://i812.photobucket.com/albums/zz41/L4sse/IMG_4612_zps85527621.jpg)

Title: Re: Holset HE200WG + Equal runner manifold + 3" downpipe for Golf/Jetta mk1 1.6TD
Post by: 3benny3 on October 25, 2014, 12:46:22 pm

 That is one sweet looking engine you have there!

Title: Re: Holset HE200WG + Equal runner manifold + 3" downpipe for Golf/Jetta mk1 1.6TD
Post by: One_punchmachinegun on October 26, 2014, 12:36:20 pm

What was this on?

Title: Re: Holset HE200WG + Equal runner manifold + 3" downpipe for Golf/Jetta mk1 1.6TD
Post by: One_punchmachinegun on October 26, 2014, 12:36:37 pm

Car wise?

Title: Re: Holset HE200WG + Equal runner manifold + 3" downpipe for Golf/Jetta mk1 1.6TD
Post by: Alcaid on October 26, 2014, 12:54:43 pm

Have you read the text? ;) Golf mk1/A1, already sold

Title: Re: Holset HE200WG + Equal runner manifold + 3" downpipe for Golf/Jetta mk1 1.6TD
Post by: Jetmugg on November 08, 2014, 08:19:22 am

Any pics of the HE200WG with downpipe flange / V band setup?  I haven't been able to find any good drawings / diagrams of the HE200WG online.

That turbo sounds very good.

Steve.

Title: Re: Holset HE200WG + Equal runner manifold + 3" downpipe for Golf/Jetta mk1 1.6TD
Post by: Alcaid on November 08, 2014, 12:16:25 pm

This setup was kinda different than what we are discussing Steve as it had a HE221W 5cm turbine housing, a odd version of the HE221W with the HE200WG turbine wheel, HE221W downpipe flange.

The standard HE200WG downpipe flange looks like this:

(http://i14.photobucket.com/albums/a345/Alcaid/cfe3603f.jpg)

Flange, directly to 3" that I have drawn looks like this:

(http://i14.photobucket.com/albums/a345/Alcaid/Jetta/E61D9844-A162-4ED0-BDFF-6FBAF5B2C226-25316-0000068EE429D9A3.jpg)

(http://i14.photobucket.com/albums/a345/Alcaid/Jetta/HE211W3in.jpg)

An adapter to 3" v-band can be made like this with a piece of 3" pipe, some hammering and welding ;)

(http://i14.photobucket.com/albums/a345/Alcaid/Jetta/HE211W3intoV-band.jpg)