VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: bryanb on June 18, 2014, 07:28:10 pm
-
Anyone know of hand what the factory output on the 1.6td is? And if so what what do you think mine is now if I have a t3 Giles pump?
-
How long is a rope.... Being a bit more precise would make it easier to give you a reply
1.6TD came with 60bhp, 70bhp and 80bhp
Are you now running the stock 1.6TD T3 or another T3? Stock one flows 20lbs/min so should be good for about 140bhp but with a turned up 9mm pump normally stops at 120-130bhp
What has been done to your pump? Do you know how much fuel it supplies? (cc), what size piston etc?
-
Well *** did know their are so many Variables but it Is a Garrett t3 and I don't know the specifics on the pump but I was told should peak at about 26lbs but have not tested that yet
-
The under the hood sticker shows 52 for the non turbo and 68 for TD.
-
The under the hood sticker shows 52 for the non turbo and 68 for TD.
and 70for the eco, 80 for the GTD...approx.
Garrett made many t3 turbos, which one do you have
-
The Man
What are the differences with the GTD. More boost, intercooler.
Thanks.
-
Eco was 60 not 70 (engine code 1V, 8mm pump without LDA)
-
ECO was rated at 44KW or 59HP.
-
My bad...rounding numbers and missed the 6 for 60.
-
Tomorrow I will snap a pic of the data plate on the pump and turbo.