VWDiesel.net The IDI, TDI, and mTDI source.
Model Specific Questions and Info => MK1 Golf/Jetta and B1 Dasher => Topic started by: GEE-BEE on June 12, 2014, 04:46:33 pm
-
I purchased a 4 hole boat trailer spare tire holder to relocate the battery under the bed.
http://www.ebay.com/itm/Fulton-Trailer-Spare-Tire-Bracket-Carrier-Holder-Mount-/400725233929?pt=BI_Heavy_Equipment_Parts&hash=item5d4d15d109#ht_2861wt_983
35.99
The stock mount would not allow me to place the tire anywhere except for center as I wanted a offset mount .
I purchased a Honda alloy spare tire assy 4 x 100 x 15 '( super light )
125.00 , ebay find
I purchsed a group 34 Optima CNC battery holder from Artec, this will allow the battery to side load and I have four post now.
147.50 shipped
battery holder 65.00
http://www.artecindustries.com/Group-34-Optima-Battery-REAR-Mount_p_87.html
I will run a 1/0 cable thru the cab to a BMW remote battery Pos box and remote positive terminal where the old battery sits
term box and remote postive was 35.00 on ebay for both items
Iam welding these two items under the bed supports
-
GeeBee first let me say that I love your posts with info on these aftermarket mods; any chance you could put a link in your sig to pics of your truck with all these glorious mods?
-
Thanx
Send me a email and I will give you pic's
[email protected]
I welded to plates to the crossovers, then applied the undercoating spray
the trailer spare mount was weleded to one
Really came out they way I wanted, the cnc battery mount is going to the powdercoater