VWDiesel.net The IDI, TDI, and mTDI source.

General Information => General => Topic started by: Dakotakid on March 22, 2014, 05:51:55 pm

Title: OK, I give up.....let's have some fun!
Post by: Dakotakid on March 22, 2014, 05:51:55 pm

This video baffles me.

No, it ain't what is being done IN the video. It's the HEAD in the video. The kid doing the "work" is a "putts," so don't even bother turning on the volume. (Someone will write in and say, "....hey, THAT'S my son!").

No seriously.......let's concentrate here for a couple minutes:  there is something "irregular" about this head.

Skim through it and observe every possible clue in identifying this head and look for the irregularity. Then, we will discuss the "oddness" here. I think I know what the deal is. It's either ONE thing or ANOTHER. See what you come up with.

To whoever wins, I will send my next set of already used heat shields! (THAT'S going to wake up the blue ink!).

http://www.youtube.com/watch?v=CFIYHhu_eEc

Title: Re: OK, I give up.....let's have some fun!
Post by: Syncroincity on March 22, 2014, 07:18:56 pm

Oval exhaust ports on a 1.6 head?

Title: Re: OK, I give up.....let's have some fun!
Post by: TylerDurden on March 22, 2014, 08:02:18 pm

That would be putz, Tatala.

Title: Re: OK, I give up.....let's have some fun!
Post by: TylerDurden on March 22, 2014, 08:25:54 pm

Frankenmotor

1.9 Hydro head, mech lifters.

Short injectors.

Oval ports as noted above.

Title: Re: OK, I give up.....let's have some fun!
Post by: ORCoaster on March 22, 2014, 09:09:36 pm

I think all responses to this one need to be in BLUE!

Title: Re: OK, I give up.....let's have some fun!
Post by: Dakotakid on March 22, 2014, 09:28:01 pm

OK....yes, it is the LIFTERS that I am getting at!

Is THAT a 1.9 head? Really?

And, so those would be Crespo lifters then?

The putz (thank you) ain't no ones' son errr cousin errr little brother? I have NEVER had a nice clean open space like THAT to work in. Dam-ned putz, anyway!