VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: Jagerauto on November 24, 2013, 06:18:51 pm

Title: AAZ return line help
Post by: Jagerauto on November 24, 2013, 06:18:51 pm

Hey guys finally got my motor in! I. Need to finish the return line before I can finish the exhaust.

What size is the banjo bolt into the block?

I'm using a T3 turbo, I ordered a flange for it with a -10AN fitting. So I need an adapter from the thread on the block with a 90 into a -10AN. Then a hose.

Don't want this to leak. So please help!

Title: Re: AAZ return line help
Post by: theman53 on November 24, 2013, 06:56:45 pm

IIRC it is 22mm.

Title: Re: AAZ return line help
Post by: Jagerauto on November 24, 2013, 08:57:34 pm

Something like this then?

http://bit.ly/1esFm27

Title: Re: AAZ return line help
Post by: theman53 on November 25, 2013, 04:54:29 am

yes, the a/n and JIC are the same so any local hydro shop should have the JIC. I like JIC as it is steel and the aluminum a/n fittings and I don't get along well.

Title: Re: AAZ return line help
Post by: stewardc on November 26, 2013, 07:37:27 am

Yup, this is what you need. Take the banjo bolt to any good hydraulic shop and they've got the fitting.

(http://img.photobucket.com/albums/v648/stewardc/100_1135_zps639ad8b3.jpg)