VWDiesel.net The IDI, TDI, and mTDI source.

General Information => General => Topic started by: bbob203 on November 18, 2013, 04:09:11 am

Title: Fittings for custom TDi/AAZ oil drain.
Post by: bbob203 on November 18, 2013, 04:09:11 am

These look to be the same size as the factory fittings. Posting the think for myself and for others.

http://www.ebay.com/itm/Turbo-Water-Pipe-M16x1-5mm-Garrett-T3-TB03-SAAB-VOLVO-Nissan-R31-R33-1-2-Hose-/380768712813?pt=Motors_Car_Truck_Parts_Accessories&hash=item58a795786d&vxp=mtr

Title: Re: Fittings for custom TDi/AAZ oil drain.
Post by: theman53 on November 18, 2013, 05:08:16 am

wonder if that is the same as the IP banjo?

Title: Re: Fittings for custom TDi/AAZ oil drain.
Post by: burn_your_money on November 18, 2013, 05:45:59 am

Quote from: theman53 on November 18, 2013, 05:08:16 am

wonder if that is the same as the IP banjo?

IP banjo is the same as the oil feed line on AAZ/AHU/1Z engines.

Title: Re: Fittings for custom TDi/AAZ oil drain.
Post by: stewardc on November 20, 2013, 05:37:08 am

Why use a banjo at all? I converted mine to AN fittings. MUCH nicer.

Title: Re: Fittings for custom TDi/AAZ oil drain.
Post by: bbob203 on November 20, 2013, 05:55:55 am

I was thinking this may work for the DRAIN banjo fitting on the back of the block but i think its to small.

Title: Re: Fittings for custom TDi/AAZ oil drain.
Post by: stewardc on November 20, 2013, 06:54:23 am

Once again, why use a banjo on the drain??? Use an AN hose.

Title: Re: Fittings for custom TDi/AAZ oil drain.
Post by: stewardc on November 25, 2013, 04:01:54 am

Here are the parts you need.

(http://img.photobucket.com/albums/v648/stewardc/100_1135_zps639ad8b3.jpg)