VWDiesel.net The IDI, TDI, and mTDI source.

General Information => General => Topic started by: CRSMP5 on September 27, 2013, 07:12:38 pm

Title: not winning!!!!!
Post by: CRSMP5 on September 27, 2013, 07:12:38 pm

(https://driiive.com/assets/cars/380cbb69fd4573539d6b334deed5495b93c506c9/photos/3673481380333668-896f277fd1.jpg)

2-07 jetta mk5 pd, dsg.... shows up on hook... car stalled while driving.. hitting key = smoke... motor locked solid.... remove lower pan to get to crank bolts to see if it stripped teeth off belt... found that.... dsg baby... popped those out the tin by the axle flange.. they bent the tin to fall on pan like that too...

and who says xzn bolts suck...

(https://driiive.com/assets/cars/380cbb69fd4573539d6b334deed5495b93c506c9/photos/1329441380333820-15c94d7a25.jpg)

look at that hour glass shape!!!! 8mm crank bolt w/xzn head... how do you do that??? all 3, well 3.667777777 bolts... popped head off 4th.. but its body stuch in hole till i unscrewed it w/screwdriver... was not tight in crank sprocket thank god... this was off car i did cam in few weeks ago.. 06 pd mk5 jetta... :P yea they paying bills...

Title: Re: not winning!!!!!
Post by: 745 turbogreasel on September 27, 2013, 09:08:14 pm

Are the ringlets a tapered spring?

Title: Re: not winning!!!!!
Post by: CRSMP5 on September 27, 2013, 10:26:38 pm

its got multi mass flywheel... and those are spring parts... look like broken valve springs(yes in size. need to put quarter by one)... my biggest worry is the aluminum and locked solid due to it mess in the bell housing.. if it cracked or poked hole in it.. we will have big issues..

close up

(https://driiive.com/assets/cars/380cbb69fd4573539d6b334deed5495b93c506c9/photos/9656561380333719-24952b9128.jpg)

Title: Re: not winning!!!!!
Post by: 745 turbogreasel on September 28, 2013, 01:19:26 am

No amount of smooth is worth the ^$#% those DMFs cause.