VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: jlpst94 on August 09, 2013, 11:07:50 am

Title: Gasser oil pan on 1.6 n/a?
Post by: jlpst94 on August 09, 2013, 11:07:50 am: Anyone know if a gasser oil pain will bolt on a 1.6 diesel block?
Title: Re: Gasser oil pan on 1.6 n/a?
Post by: bbob203 on August 09, 2013, 11:10:10 am: yes it will work if its a transversal motor.
Title: Re: Gasser oil pan on 1.6 n/a?
Post by: RabbitJockey on August 09, 2013, 11:46:00 am: Theyre the same only difference could be early low volume pan
Title: Re: Gasser oil pan on 1.6 n/a?
Post by: jlpst94 on August 09, 2013, 11:46:20 am: Perfect, Thanks
Title: Re: Gasser oil pan on 1.6 n/a?
Post by: jlpst94 on August 09, 2013, 11:48:13 am: Broke a turbo return line on an ecodiesel and need to make it an N/A until I come up with a new turbo setup.
Title: Re: Gasser oil pan on 1.6 n/a?
Post by: CrazyAndy on August 09, 2013, 04:54:58 pm: Quote from: jlpst94 on August 09, 2013, 11:48:13 am
Broke a turbo return line on an ecodiesel and need to make it an N/A until I come up with a new turbo setup.

Have you thought about re-welding the oil return?
Title: Re: Gasser oil pan on 1.6 n/a?
Post by: 8v-of-fury on August 09, 2013, 09:30:48 pm: Quote from: jlpst94 on August 09, 2013, 11:48:13 am
Broke a turbo return line on an ecodiesel and need to make it an N/A until I come up with a new turbo setup.

Quote from: CrazyAndy on August 09, 2013, 04:54:58 pm
Quote from: jlpst94 on August 09, 2013, 11:48:13 am
Broke a turbo return line on an ecodiesel and need to make it an N/A until I come up with a new turbo setup.

Have you thought about re-welding the oil return?

The return? Just cut the bad piece out and add a rubber oil rated line in with clamps. No pressure there.
Title: Re: Gasser oil pan on 1.6 n/a?
Post by: jlpst94 on August 10, 2013, 06:33:47 pm: I'm gonna replace the eco turbo and pump. The oil return is different on the TD pumps so I'm just running it as a N/A until I get all of the parts

Sent from my iPad using Tapatalk HD
Title: Re: Gasser oil pan on 1.6 n/a?
Post by: jlpst94 on August 10, 2013, 06:36:29 pm: What oil line do you guys know of that will take that kind of heat? If I could just clamp something on to replace the braided section I probably would do that rather than take the time to remove everything and weld in a new piece.

Sent from my iPad using Tapatalk HD
Title: Re: Gasser oil pan on 1.6 n/a?
Post by: 8v-of-fury on August 10, 2013, 08:05:27 pm: Quote from: jlpst94 on August 10, 2013, 06:36:29 pm
What oil line do you guys know of that will take that kind of heat? If I could just clamp something on to replace the braided section I probably would do that rather than take the time to remove everything and weld in a new piece.

Sent from my iPad using Tapatalk HD

I am pretty sure I have seen just the rubber hose.. like used on oil coolers. 300psi stuff.
Title: Re: Gasser oil pan on 1.6 n/a?
Post by: ORCoaster on August 10, 2013, 09:10:28 pm: 300 psi hose for power steering at auto Bones is something close to $3/foot. I used it on my remote oil filter and seems fine with the heat. does not get soft and droop.
Title: Re: Gasser oil pan on 1.6 n/a?
Post by: jlpst94 on August 22, 2013, 09:01:22 am: The gasser oil pan bottoms out on the dipstick tube. F$&# I guess I'll try to cap off my turbo oil pan and use it.

Sent from my iPad using Tapatalk HD
Title: Re: Gasser oil pan on 1.6 n/a?
Post by: RabbitJockey on August 22, 2013, 10:18:51 am: must be an older pan?