VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: the4ork on June 12, 2013, 12:33:07 pm

Title: WTB B4 passat tdi pedals for mk2 tdi swap
Post by: the4ork on June 12, 2013, 12:33:07 pm

i have a mk3 parts car, doesnt look like i can get the pedals in without lots of mods.

going to use the 02a so i have most of the hyd clutch setup, but i need the pedal assembly so i can bolt it to my firewall and have everything plug and play including cruise

thanks

Title: Re: WTB B3 passat tdi pedals for mk2 tdi swap
Post by: bbob203 on June 12, 2013, 12:58:36 pm

make sure you get one with the cruise diaphragm on it so you can relocate the cruise diaphragm from under the hood to the pedal.

Title: Re: WTB B3 passat tdi pedals for mk2 tdi swap
Post by: CRSMP5 on June 12, 2013, 01:53:17 pm

tdi... no cable... so no vac pod for cruise...

needs to be non abs with slave bracket too... tht part hard to obtain...

Title: Re: WTB B3 passat tdi pedals for mk2 tdi swap
Post by: burn_your_money on June 13, 2013, 04:22:23 am

Did you guys get a b3 with TDI? Ours started with b4.

Title: Re: WTB B3 passat tdi pedals for mk2 tdi swap
Post by: the4ork on June 13, 2013, 08:00:58 am

i probably mean b4, dont know much about B series passats

Title: Re: WTB B4 passat tdi pedals for mk2 tdi swap
Post by: CRSMP5 on June 13, 2013, 01:08:27 pm

b3 hydro clutch... like roddo.. he needs hydro clutch.. the clutch master needs to match poedal too.. b3 different then b4... old is solid bar.. b4/mk3 is stamped into a c like shape.. hoe they affix 100% different.. he just needs b3-b4 prefeered non abs pedals and bracket for clutch master.. gotta have that bracket... you can mod the mk2 with a hole and bolt if you get that bracket...

before i install this b3 into the mk2 that i have ill get you pic...

Title: Re: WTB B4 passat tdi pedals for mk2 tdi swap
Post by: CRSMP5 on June 14, 2013, 06:32:59 am

http://www.vwdiesel.net/forum/index.php?topic=33535.0

i made this thread for you... i am most likey going to fab a clutch master bracket... look at it.. lets talk..