VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: Gizmoman on June 08, 2013, 12:15:06 pm

Title: IP plumbing questions
Post by: Gizmoman on June 08, 2013, 12:15:06 pm

Here's a snapshot of my whammer-jammer Giles pump.
(https://lh5.googleusercontent.com/-BqF-Z-tOuLc/UbOAn2T6wqI/AAAAAAAAB0A/vtSW-QFwzhE/s640/DSC00512.JPG)

Can anyone tell me if I have the ports labeled correctly?

On the FUEL OUT port (if correct), there is a dual banjo fitting. I am assuming that the smaller barb goes to one of the small barbs on #1 injector. The larger barb goes back to tank.

Also, the barb on top of the LDA (I think that's what it is) - is boost from the turbo. This would be a hose "T'd" from the line going to my DIY boost controller which opens the waste-gate - correct?

Let me know If I have labeled this incorrectly.

Thanks.

Jim

Title: Re: IP plumbing questions
Post by: libbydiesel on June 08, 2013, 12:21:36 pm

Yes.

Title: Re: IP plumbing questions
Post by: Gizmoman on June 08, 2013, 12:43:22 pm

Quote from: Gizmoman on June 08, 2013, 12:15:06 pm

Let me know If I have labeled this incorrectly.

Thanks.

Jim

Quote from: libbydiesel on June 08, 2013, 12:21:36 pm

Yes.

Yes, incorrect or Yes, correct? hahah

Title: Re: IP plumbing questions
Post by: CRSMP5 on June 08, 2013, 01:12:18 pm

:P

you driving.. me nevogating...

me.. up here turn left...
you... i wanna turn left, right?
me.... right....
you... turn right................................................................


dont overcomplicate...

Title: Re: IP plumbing questions
Post by: libbydiesel on June 08, 2013, 01:44:48 pm

The only question you asked was, "can anyone tell me?"  Yes, someone can tell you.   :D

You have it labelled correctly.  

Title: Re: IP plumbing questions
Post by: Gizmoman on June 08, 2013, 02:00:46 pm

I really try hard to explain myself clearly and the harder I try, the muddier it gets ;D

Who's on first?

Thanks for the "correct" answer.