VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => TDI Engine -General Info => Topic started by: strawhouse on April 24, 2013, 06:54:52 pm

Title: AHU TDI Doka
Post by: strawhouse on April 24, 2013, 06:54:52 pm

Need some input on a TDI swap in my 1988 Doka.  I am trying to figure out what flywheel / pressure plate / clutch combo I need for hooking this thing up.  The Doka is originally diesel, it came with the 1.6TD.  I am thinking that I would use the AHU flywheel and pressure plate but use the 1.6TD style clutch...  this is just what I have read up to this point.  What are your thoughts? 

Title: Re: AHU TDI Doka
Post by: CRSMP5 on April 24, 2013, 08:06:46 pm

no.. reuse stock parts... not same as tdi stuff.. but your stock stuff fits tdi

Title: Re: AHU TDI Doka
Post by: libbydiesel on April 24, 2013, 08:39:34 pm

Use the TDI pressure plate and flywheel and the waterboxer 228mm disc.  You need to modify the nose of the starter, bend down the PP tabs and sometimes clearance a little in the bell housing.  Read up...

AAZ would be the same:
 http://www.vwdiesel.net/forum/index.php?topic=33157.0