VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: RustyCaddy on April 07, 2013, 11:37:50 am

Title: FS 1.5l pistons & precups NOS
Post by: RustyCaddy on April 07, 2013, 11:37:50 am

Thought i might rebuild a 1.5l motor but plans have changed.

Set of 0.50mm over, made in Germany Mahle pistons, w/ rings, pins and circlips.  Some light oxidation in spots but should buff off.   Asking $250.00 USD shipped in continental USA.  Maybe last i'll ever see.

Also, 4 new precups to fit 1.5l (approx. 30.5mm diameter) but one is missing the ball bearing and another is miss labeled (?); might fit turbo head but made for NA (no triangles). Best offer.

Approx. 35,000 mile on rebuild 1.5l head, forwarned that it came off a high compression 1.5/1.6 hybrid that burned mostly biodiesel and veg oil, with oil return reducer, looks straight but i dont have machnists straight edge so selling as a core, no camshaft...best offer.

Pictures available on request.

Title: Re: FS 1.5l pistons & precups NOS
Post by: RustyCaddy on April 14, 2013, 01:04:58 pm

ttt

Title: Re: FS 1.5l pistons & precups NOS
Post by: RustyCaddy on April 21, 2013, 10:04:16 am

ttt

Title: Re: FS 1.5l pistons & precups NOS
Post by: RustyCaddy on April 28, 2013, 10:50:38 am

ttt

Title: Re: FS 1.5l pistons & precups NOS
Post by: RustyCaddy on May 18, 2013, 09:46:44 am

btt

Title: Re: FS 1.5l pistons & precups NOS
Post by: RustyCaddy on June 02, 2013, 09:23:17 am

ttt

Title: Re: FS 1.5l pistons & precups NOS
Post by: R.O.R-2.0 on June 03, 2013, 06:53:37 pm

Quote from: RustyCaddy on April 07, 2013, 11:37:50 am

Thought i might rebuild a 1.5l motor but plans have changed.

Set of 0.50mm over, made in Germany Mahle pistons, w/ rings, pins and circlips.  Some light oxidation in spots but should buff off.   Asking $250.00 USD shipped in continental USA.  Maybe last i'll ever see.

Also, 4 new precups to fit 1.5l (approx. 30.5mm diameter) but one is missing the ball bearing and another is miss labeled (?); might fit turbo head but made for NA (no triangles). Best offer.

Approx. 35,000 mile on rebuild 1.5l head, forwarned that it came off a high compression 1.5/1.6 hybrid that burned mostly biodiesel and veg oil, with oil return reducer, looks straight but i dont have machnists straight edge so selling as a core, no camshaft...best offer.

Pictures available on request.

if it has an oil return reducer INSTALLED IN THE HEAD, then it is a 1.6 head that was used on a 1.5D engine..

or do you mean that the oil return reducer for the block is included with the head?

the 1.5 head has a very small oil return passage already.. the 1.6 head has the bigger oil (would need reducers installed if not being used on proper block) return passages.

Title: Re: FS 1.5l pistons & precups NOS
Post by: RustyCaddy on June 04, 2013, 04:58:26 am

The head has the small oil return.  The reducer came from the VWparts forums sponsor.