VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: 92EcoDiesel Jetta on February 26, 2013, 02:39:33 pm

Title: Injection pump vise
Post by: 92EcoDiesel Jetta on February 26, 2013, 02:39:33 pm

working with an IP just laying on the bench or sitting on a coffee can sucks. I don't have a big vise  so I made this out of 3/4 ply and a chunk of 4 x4 fence post scrap. ain't pretty but should be fully functional and infinitely adjustable.

 will post back on how well it works after I spend some time on it.

Title: Re: Injection pump vise
Post by: TylerDurden on February 26, 2013, 02:56:52 pm

That vise in the rock&roll IP video might be a good example to mimic.

Title: Re: Injection pump vise
Post by: 745 turbogreasel on February 26, 2013, 03:22:00 pm

No see pics, but  my MIG wire spool I've  been using could stand an upgrade.

Title: Re: Injection pump vise
Post by: 92EcoDiesel Jetta on February 26, 2013, 04:36:15 pm

Sorry, forgot the pics

(http://i1183.photobucket.com/albums/x480/Ecodiesel92/IMG_20130226_185205-1_zpse56a20c2.jpg)

(http://i1183.photobucket.com/albums/x480/Ecodiesel92/IMG_20130226_185432-1_zps0fad4ee7.jpg)

(http://i1183.photobucket.com/albums/x480/Ecodiesel92/IMG_20130226_185312-1_zpsd7df49da.jpg)

(http://i1183.photobucket.com/albums/x480/Ecodiesel92/IMG_20130226_170836-1-1_zpsac89ec16.jpg)

Title: Re: Injection pump vise
Post by: TylerDurden on February 26, 2013, 05:27:07 pm

That's a good setup.

Title: Re: Injection pump vise
Post by: 92EcoDiesel Jetta on February 27, 2013, 10:08:07 am

Quote from: TylerDurden on February 26, 2013, 05:27:07 pm

That's a good setup.

Thanks! I had concerns of the smallest speck of saw dust getting into the IP so I made the wood into aluminum lol!

(http://i1183.photobucket.com/albums/x480/Ecodiesel92/IMG_20130227_130200-1_zps2289d0dc.jpg)