VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => TDI Engine -General Info => Topic started by: bbob203 on February 23, 2013, 06:35:47 pm

Title: 10 ga bullet connector for tdi glow plugs
Post by: bbob203 on February 23, 2013, 06:35:47 pm
Seems as though they would work seeing as the 16-14 gauge ones fit snugly on the glowplug just wasnt sure about that thin a gauge of wire.
Title: Re: 10 ga bullet connector for tdi glow plugs
Post by: 8v-of-fury on February 24, 2013, 05:34:31 pm
If each were individual to the plugs a 14g wire will carry 15a (more than each plug) easily up to 6 feet.
Title: Re: 10 ga bullet connector for tdi glow plugs
Post by: bbob203 on February 24, 2013, 06:54:14 pm
If each were individual to the plugs a 14g wire will carry 15a (more than each plug) easily up to 6 feet.

hmm thank you sir. I will do that then much better than 70+ dollars for a new harness that will break on me.
Title: Re: 10 ga bullet connector for tdi glow plugs
Post by: 8v-of-fury on February 24, 2013, 06:54:51 pm
http://www.windsun.com/Hardware/Wire_Table.htm
Title: Re: 10 ga bullet connector for tdi glow plugs
Post by: xxkoadyxx on April 07, 2013, 07:59:39 am
ya i was looking into building my own harness for the glow plugs too, i did for my 1.9Td but the glow plugs are different..
Title: Re: 10 ga bullet connector for tdi glow plugs
Post by: bbob203 on April 07, 2013, 08:16:38 am
ya i was looking into building my own harness for the glow plugs too, i did for my 1.9Td but the glow plugs are different..

The 14-16 ga female bullet connectors or what I will be using when I hook my system up. The fit perfect on tdi glowplugs
Title: Re: 10 ga bullet connector for tdi glow plugs
Post by: xxkoadyxx on April 07, 2013, 12:26:05 pm
hmm ok. mine work..just im not getting power to my cut of switch and idk why..