VWDiesel.net The IDI, TDI, and mTDI source.
For Sale/Looking For => Parts for Sale/Wanted => Topic started by: Smokey Eddy on November 11, 2012, 03:32:41 pm
-
I still have some left over parts from my Jetta that need to go asap and I really dont want to turf them because they are all in excellent working order so I hope someone can use them!
020 transmission - recently apart for an R&R but it was in excellent condition. I thought I had photos of the syncro's but i cant find them. Anyways, they still have great peaks on the roof tops ;)
Unfortunately I don't really have any pictures of it but im sure you guys know what it looks like :P
Its on my Parent's garage floor at the moment and they really want it out of there but I'd rather someone get use out of it as it's in great working order than just a couple bucks for scrap in my pocket.
200mm flywheel freshly machined that I never used because I switched to a 210mm vr6 set.
(http://i49.photobucket.com/albums/f279/edmcclung/DSC00113_zps94b48d6b.jpg)
(http://i49.photobucket.com/albums/f279/edmcclung/DSC00111_zpsacd47093.jpg)
Garret T03 with home made adjustable waste gate (see bolt in bottom pic for adjusting - RadoTD actually made this for me). Rebuilt the cold side but couldn't get the hot side apart for fear of breaking bolts - 1 bolt sheared on the hot side. Made gobs of boost at a moments notice. Blew the socks off my gasser buddies with the boost this thing magically made but I feel the porting I had done and the 2.5 inch exhaust also helped a lot.
Missing the factory oil drain as I had to make one to fit my AAZ. (Also, not included as I cut it to remove the turbo).
(http://i49.photobucket.com/albums/f279/edmcclung/DSC00121_zpsd864aaf1.jpg)
(http://i49.photobucket.com/albums/f279/edmcclung/DSC00120_zps22e23066.jpg)
This turbo is now shrink wrapped ready for shipping.
This is a 90 amp bosch alternator I bought for way too much money when I was living at a ski resort last winter. Barely used... maybe has 10,000km on it? maybe? Also shrink wrapped.
Too give you an idea of how used it is, I didn't clean it before I took these pictures.
(http://i49.photobucket.com/albums/f279/edmcclung/DSC00118_zpsdb5efb3e.jpg)
(http://i49.photobucket.com/albums/f279/edmcclung/DSC00117_zps9a338d95.jpg)
I didn't run a serpentine on my AAZ so it might still have the Vbelt pulley on it but if I recall I think I took it off and put the new nut & washer back on.
On second thought I'm pretty certain i took it all off because the fan was a little damaged as you can see in the photo. I think something hit it or maybe it was from when i initially took it off my old alternator.
These are the snow tires I used last winter. Also very very few kms on them but they had 1 season on them when I bought them. I obviously only suspect a local dubber will pick these up. I will also put them on Vancouver Craig's List but you fellas get 1st dibs. These tires saved my life more than once. Great set. On Steelies.
(http://i49.photobucket.com/albums/f279/edmcclung/DSC00136_zps6f61a735.jpg)
(http://i49.photobucket.com/albums/f279/edmcclung/DSC00134_zps8d19ba04.jpg)
(http://i49.photobucket.com/albums/f279/edmcclung/DSC00135_zps5de74e6e.jpg)
I have brand new brushes I got for my 65 amp alternator I never used. Would hate to just toss em.
(http://i49.photobucket.com/albums/f279/edmcclung/DSC00141_zpsd2cf503b.jpg)
And this is the deck out of the golf I got. Not sure if anyone would want it... it's in really nice condition.
(http://i49.photobucket.com/albums/f279/edmcclung/DSC00033.jpg)
I also have a set of black BBS style (fakes) aluminum rims on shot rubber. I think I also have centering rings for them and Gorilla bolts.
(http://i49.photobucket.com/albums/f279/edmcclung/DSC00137_zps37553b65.jpg)
To give you an Idea of what I'm looking for I was hoping to get some coin for the alternator as it's hardly used and a very nice one and I paid in excess of $200 for it :( . I think I drove from Kelowna to Abbotsford and back maybe 3 times and from Big White to Kelowna like 8 times (a 75km round trip).
The turbo is also in really good working order so I was hoping to get something back from it.
The tranny for example if you can come to Abbotsford, BC it's yours OR pay shipping (which would be insane as its really heavy and big). Brushes - you pay the post. I think they were $20 retail.
You guys are all honest folk so pricing is basically up to you. Throw me an offer at ed_mcclung@hotmailDOTcom
-
what gearing on tranny?
-
Hmmmm you know i don't know. I dont live where it is so I cant really give you a serial number. 1st was really short, 2nd was pretty tall. so was third. 4th and 5th were almost the same.
I could go about 30km/h in 1st. 60 in 2nd. 110 in 3rd. 140 in 4th and ??? in 5th. I've gone 200km/h in that car in the past so 5th was pretty tall.
-
Intake spoken for! (that was quick!)
-
The tranny is probably a 4S
Delivery available on the tires? ;D
-
Lol. Would it really be worth it Tyler? hahahahaha They are a wicked set though...
-
It'd be worth it for me :P
I've run Nordics for years, they are great.
-
Hmmm WWWWWEEEEELLLLLLLL ... hmm.
I'd have to take them to a wheel shop to remove the rims for a start...
I think the shipping would be insane no? like we're talking ... more if not the same as the AAZ you sent me ...
-
no no no, you don't understand. I want them on the rims, and I want you to personally deliver them.
There's no snow here (yet) so I can't tempt you with snowboarding, but we could... crap, Ontario has nothing :(
-
pmed
-
You box the wheels individually so they aren't oversize, it's not too bad but I haven't shipped a set recently and live in the US so I can't say exactly.
-
Pm sent
Tapatalk.
-
one thing to mention, the brushes ONLY fit 65a bosch alts...
the 90s use a different style brushpack, with diodes built in..
-
PM sent Re: trans.
-
I kinda want the deck for OEM+ status
-
Would the brushes fit a Motorola 65 A non-AC 81 Caddy alternator?