VWDiesel.net The IDI, TDI, and mTDI source.

General Information => General => Topic started by: bbob203 on September 06, 2012, 05:35:53 am

Title: self adjusting to manual clutch cable.
Post by: bbob203 on September 06, 2012, 05:35:53 am

can I reuse the bushings and release arm anchor plate?

Title: Re: self adjusting to manual clutch cable.
Post by: theman53 on September 06, 2012, 05:55:08 am

No they are torque to yeild pieces of sheet metal and rubber, one time use only...



Did you really just ask this question?

Title: Re: self adjusting to manual clutch cable.
Post by: CRSMP5 on September 06, 2012, 06:58:12 am

rubber piece in tranny different for the 2 sstyles... the rubber piece on arm where cable hold down goes can also be different... one is thicker/longer then the other..

Title: Re: self adjusting to manual clutch cable.
Post by: bbob203 on September 06, 2012, 08:29:55 am

ok thanks. that's what I was looking for.

Title: Re: self adjusting to manual clutch cable.
Post by: R.O.R-2.0 on September 06, 2012, 09:22:56 am

ive always re-used both pieces with no ill side effects..

Title: Re: self adjusting to manual clutch cable.
Post by: bbob203 on September 06, 2012, 09:40:42 am

I got down to the garage and messed with a bit looks like it should work with the self adjusting bushings and anchor plate.

Title: Re: self adjusting to manual clutch cable.
Post by: R.O.R-2.0 on September 06, 2012, 09:42:36 am

Quote from: bbob203 on September 06, 2012, 09:40:42 am

I got down to the garage and messed with a bit looks like it should work with the self adjusting bushings and anchor plate.

IT DOES!!

trust me, ive done it.. took auto cable out, threw it away, and used manual..