VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: Darkness_is_spreading on August 31, 2012, 11:27:00 pm

Title: AAZ timing belt cover modifications for MK1
Post by: Darkness_is_spreading on August 31, 2012, 11:27:00 pm

Hey Everyone,

I had to modify the timing belt cover to fit my first gen and here are some pics of the results.... 
It took a few tries but it fits like a glove around the engine and the passenger engine bracket.

(http://s19.postimage.org/z7t39wbdr/20120829_214846.jpg) (http://postimage.org/image/z7t39wbdr/)

(http://s19.postimage.org/fr8dndg9r/20120829_214856.jpg) (http://postimage.org/image/fr8dndg9r/)

(http://s19.postimage.org/x5slvnden/20120829_215020.jpg) (http://postimage.org/image/x5slvnden/)

(http://s19.postimage.org/6m00ticv3/20120829_215343.jpg) (http://postimage.org/image/6m00ticv3/)

A little gift for the vwdiesel.net community   

Title: Re: AAZ timing belt cover modifications for MK1
Post by: shorttimer on November 09, 2012, 10:54:24 am

Glad to have found this. Will need to do.

Title: Re: AAZ timing belt cover modifications for MK1
Post by: CrazyAndy on November 10, 2012, 09:26:11 pm

Same here.

Did you have to mod the rear cover at all?  I'm using a gasser mount on my conversion and found that the stock AAZ backing plate configuration interfered.  I had to cut a piece out of the bottom.