VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: sdubfid on August 19, 2012, 12:59:10 am
-
...............
-
Looking sweet - are the intake mods needed due to space issues or to improve flow?
I am rebuilding a 1.9 for a Vanagon (adding an IC as well) and the stock intake looks like it wouldn't flow too well.
Keep up the good work.
-
i would say flow...
-
The standard stuff fits fine! This is my AAZ powered 99 3dr vitara (sidekick/tracker).
(http://i772.photobucket.com/albums/yy1/Munkee_album/Engine%20swap/AAZ%20in/Photo0174.jpg)
How's your transmission holding up?
-
Sounds like a bunch of maracas at idle, Eh? ::)
-
Looks great!
Is it running? If so, what are your EGT numbers at WOT?
-
Sorry, I blipped right past your numbers - I usually get it the second time though ;D
Sounds like success - nice job.
-
The input shaft bearing gets louder every week it seems. Previous owner drove it from 2004 to 2012 and replaced the trans once with a used one. I'm not sure how guys running tdis and the suzuki trans get them to last.
VERY CAREFULLY...
actually, i bet most of them are using the aisin-warner trannies out of toyotas.. its a popular swap.
its no secret that the kick/track/sammi trannies are built from tooth picks...