VWDiesel.net The IDI, TDI, and mTDI source.
For Sale/Looking For => Parts for Sale/Wanted => Topic started by: Toby on August 05, 2012, 12:46:55 pm
-
I am looking for the alternator/ power steering pump brackets for a 4000 or Quantum diesel. Right now the alternator sits where the IP will go.
-
quantum should have the same setup.. and may be easier to find as well.
-
dasher too... more diesel dashers then td quantiums.. same for 4k audi..
im thinking it same as a vanagon/mk1 no ac bracket...
-
dasher too... more diesel dashers then td quantiums.. same for 4k audi..
im thinking it same as a vanagon/mk1 no ac bracket...
Yep. same as A1 non-AC alt bracket.
-
I've seen a few n/a Audi 4ks in the junkyard here. I haven't seen a Dasher in decades. Is this part desirable to a lot of people? I'll pull next time I see one if it is.
-
I have the vanagon/mk1 non a/c bracket. ;D
-
The Vanagon and mk1/mk2 Rabbit/Golf/Jetta do not share ANY brackets or pulleys (actually PS pulley might be the same...) with the Quantum/Audi 1.6TD belt drive system. IIRC, the Quantum TD mounts the A/C pump and alternator on the manifold side of the engine. Injection pump, water pump and power steering go on the injector side of the engine. I have all the parts for at least one complete 1.6TD Quantum belt drive system with accessories minus the split water pump pulley.
-
The A/C pump is on the manifold side, so it looks like there would not be enough room for the alternator there. What I probably need id a photo of one to compare it with.
-
the Quantum TD mounts the A/C pump and alternator on the manifold side of the engine. Injection pump, water pump and power steering go on the injector side of the engine. I have all the parts for at least one complete 1.6TD Quantum belt drive system with accessories minus the split water pump pulley.
Would you be willing to sell the alternator/AC brackets?
-
Yes, I'd be willing to sell the parts. Here's a picture of a friend's car:
(http://i13.photobucket.com/albums/a269/libbybapa/IMAG0070.jpg)
By the manifold, in front of the air inlet tube you can see the alternator poking out. If you need more pics of the mounting, I can get them, but it might take a couple days.
-
Thanks. That is where the A/C pump is on mine (IIRC). Does yours have A/C? If so, a pic of that bracket would be most helpful.
J
-
A/C is mounted right below the alt. IIRC they share the same bracketry. I don't have a picture off hand (friend's car). I can get more pics but it might take a couple days.
-
That would be wonderful! Thanx.
-
It's really hard to get decent pictures due to the radiator fans and intercooler pipes being in the way. Here's the best I could do:
(http://i13.photobucket.com/albums/a269/libbybapa/100_1734.jpg)
(http://i13.photobucket.com/albums/a269/libbybapa/100_1733.jpg)
The A/C crank pulley is a split design with adjustment shims. The alt has a slot adjustment under it.
-
Thanks. That is exactly what I need. The A/C compressor is now where the alternator needs to go. What would you take for your extra set?
J