VWDiesel.net The IDI, TDI, and mTDI source.
For Sale/Looking For => Parts for Sale/Wanted => Topic started by: UnderPSI on April 08, 2012, 05:26:26 pm
-
What the title says, let my know what you have. Thanks
-
i can get you the bracket, but nothing else. sorry if that doesnt help you, but just throwing it out there..
the a/c and non a/c crank and water pump pulleys should be the same. it should just be the bracket that makes it special. the non a/c bracket sets the alternator closer to the flywheel..
-
brrackets for what year??? and wrong on pullies... ac wider for thicker belt then non ac..
-
brrackets for what year??? and wrong on pullies... ac wider for thicker belt then non ac..
DOH!!
your right..
the crank and water pump pulleys are DIFFERENT, like mentioned.
-
I need the a/c and power steering brackets and pulleys. Crank pulley as well, it's a mechanical 1.6 1984ish....
-
I need the a/c and power steering brackets and pulleys. Crank pulley as well, it's a mechanical 1.6 1984ish....
power steering on a rabbit? good luck finding parts for that..
-
Had all the brackets once, lost then when I moved.
-
only seen a handful of rabbits with power steering..
-
I have the p/s bracket, pulley and pump from a gasser JH engine that came from an '84 Scirocco. Does that work?
-
Where does that put the pump on the engine?
-
I was thinking the MK1 AC alternator brackets had an extra bolt hole on the bottom,
like all the MK2s AC or not.
They look similar to the Mk2 bracket so I might have confused them.
-
Where does that put the pump on the engine?
Well, under it. It looks pretty much like a MKII lashup, but I didn't compare them side by side
-
That would work, will that work with a/c?
-
I have the alt, crank and another pulley off my diesel swap. I can shoot a pic if you like. $25 shipped.
-
Don't need the alt pulley, crank pulley for a/c?
-
Anybody...?