VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: commuter boy on April 02, 2012, 06:48:44 pm

Title: Prepping pump for shipping?
Post by: commuter boy on April 02, 2012, 06:48:44 pm
I've got a lovely new Giles pump installed, and need to ship the core back to him.

Any hints for draining out the old diesel, sealing it up, packing and shipping?  I hear the courier companies are not impressed with cardboard boxes leaking diesel onto their trucks.

Title: Re: Prepping pump for shipping?
Post by: theman53 on April 02, 2012, 06:54:39 pm
You are correct sir. I was a complete idiot and sent mine full of diesel, it was stopped in ontario somewhere. I have since learned from Ohio to Giles no problem shipping. Want to hear it...hear it go:
I drain the ip from the in and out bolts, pump moved in all positions and set upside down for a while to drain. I have taken the fuel seliniod out, but it doesn't really do anything but a drip if you do it after the out bolt. I then wrap the IP in the absorbant material that will soak up oil. Put a couple plastic bags over that and finally packing material.

I have shipped the same pump that got stopped at customs the first time that way and no issues. I would almost bet you could send it full of fuel with all the crap I put on it, but it was a bad time almost losing it the first time, so I don't chance it anymore.
Title: Re: Prepping pump for shipping?
Post by: 8v-of-fury on April 02, 2012, 06:58:01 pm
Try and drain it as best you can, and then when you are done I would wrap it in a few garbage bags. Each one being taped up by itself.

I have had a few pumps come to me that way, and they were not stopped at customs.

I don't know this feeling as the pumps I ship out are sparkling clean :D lol
Title: Re: Prepping pump for shipping?
Post by: theman53 on April 02, 2012, 07:14:48 pm
Try and drain it as best you can, and then when you are done I would wrap it in a few garbage bags. Each one being taped up by itself.

I have had a few pumps come to me that way, and they were not stopped at customs.

I don't know this feeling as the pumps I ship out are sparkling clean :D lol
you have pm :D
Title: Re: Prepping pump for shipping?
Post by: CRSMP5 on April 02, 2012, 07:38:41 pm
my plan for the one i need to send to 8v...

been in bucket drainin for a couple weeks...

wrap with diapers..

wrap with serain wrap...

more diapers...

more serain/cling wrap

screw bags.. seran/cling wrap when used in excess seals its self... use lots of it... :D
Title: Re: Prepping pump for shipping?
Post by: billybobf on April 02, 2012, 10:31:52 pm
sounds like 8v is getting dirty diapers for christmas. lol
Title: Re: Prepping pump for shipping?
Post by: CRSMP5 on April 02, 2012, 11:56:07 pm
i once sent someone a single cheezy poof for x-mas wrapped up in 2 boxes worth of cling wrap....  :o  return addy on box was his fav online rc shop... every one was in on gag including kids parents... took him a hr to unwrap his cheezy poof...  8)
Title: Re: Prepping pump for shipping?
Post by: 8v-of-fury on April 06, 2012, 02:09:03 pm
sounds like 8v is getting dirty diapers for christmas. lol

Actually baby diapers? or the oil pickup foam material referred to as diapers?

i once sent someone a single cheezy poof for x-mas wrapped up in 2 boxes worth of cling wrap....  :o  return addy on box was his fav online rc shop... every one was in on gag including kids parents... took him a hr to unwrap his cheezy poof...  8)

That is hilarious, I bet you ruined his entire xmas though.. d!ck. lolol