VWDiesel.net The IDI, TDI, and mTDI source.

General Information => General => Topic started by: bbob203 on February 29, 2012, 08:17:28 am

Title: 93 passat td pedal cluster in an mk2 jetta
Post by: bbob203 on February 29, 2012, 08:17:28 am
will it bolt in? will the throttle cable work? reason being the vacuum diaphragm for the cruise on a passat is part of the cluster attached to the gas pedal inside the passenger compartment in turn reducing the likelyhood of failure of the vacuum diaphragm that is under the hood(from heat and what not)also because mine has a hole in it anyway so it needs replaced. also removing some of the clutter around the ip with the removal of the oe mk2 cruise diaphragm linkage and bracket.  make sense??
Title: Re: 93 passat td pedal cluster in an mk2 jetta
Post by: CRSMP5 on February 29, 2012, 10:03:12 am
id just add the vac ball to the throttle pedal.. but since i have used a mk2 clutch/brake set up in my b3... with b3 gas still in it.. yea it will fit/work..
Title: Re: 93 passat td pedal cluster in an mk2 jetta
Post by: bbob203 on February 29, 2012, 10:21:16 am
good idea!! ;)
Title: Re: 93 passat td pedal cluster in an mk2 jetta
Post by: bbob203 on February 29, 2012, 10:59:57 am
does it have to be from a diesel or will a gas one work as well.
Title: Re: 93 passat td pedal cluster in an mk2 jetta
Post by: CRSMP5 on February 29, 2012, 01:33:26 pm
should be the same..
Title: Re: 93 passat td pedal cluster in an mk2 jetta
Post by: bbob203 on February 29, 2012, 07:36:05 pm
these manual pedal clusters aren't for hydraulic clutches are they?
Title: Re: 93 passat td pedal cluster in an mk2 jetta
Post by: CRSMP5 on March 01, 2012, 03:56:44 am
as far as i know gas is hydro.. and the diesel is cable.. but all you need to do is add the passat throttle
Title: Re: 93 passat td pedal cluster in an mk2 jetta
Post by: R.O.R-2.0 on March 01, 2012, 07:21:08 am
as far as i know gas is hydro.. and the diesel is cable.. but all you need to do is add the passat throttle

read as:

it will be MUCH easier to just swap out the passat gas pedal, rather than the whole pedal assembly..