VWDiesel.net The IDI, TDI, and mTDI source.
General Information => Upgrades (non engine related ) => Topic started by: X@V on January 19, 2012, 06:32:12 am
-
I was buying a 0A8 gearbox (Code FSM, from a Skoda Fabia VRS). It's 99% same as the 02M but without the VSS!
I removed the VSS from my 02M and I saw how it's made: 7 notch on the diff casting.
Does someone know if the diff is the same inside the 0A8? I could drill the case and put the 02M VSS. If not, I'll install an external VSS.
Thanks
-
Are you on motorgeek? I imagine they might have some more info always trying to figure out what to use in place of broken 01A's and whatnot.
-
Why 01A?
-
I'm not really a transmission guy but I think the 01a is fragile. I was just saying the people on motorgeek.com know more about transmission swaps than do people here, or at least there is more discussion of transmission related items aside from ratios.
-
I didn't talk about 01A!!!
-
(http://i19.photobucket.com/albums/b170/xavjetta/100_2381.jpg)
0A8 bellhousing
(http://i19.photobucket.com/albums/b170/xavjetta/100_2382.jpg)
02M bellhousing
(http://i19.photobucket.com/albums/b170/xavjetta/100_2383.jpg)
(http://i19.photobucket.com/albums/b170/xavjetta/100_2384.jpg)
-
I don't know if the vss will fit as I never have tried that swap. If the cases are the same then it "should" fit I would think. Maybe some machining required if it is different??? I am guessing.
It could just be the picture, but is the starter hole higher on one than the other?
-
Starter hole is same...
There's the "plate" where the VSS sits on the 02M but not any hole.
I think I'll use an external VSS with a custom trigger wheel.
-
Why 01A?
I was referring to it as an example. %90 of the people on this site run 020 don't have any other options and don't know anything about skoda gearboxes. I was attempting to refer you to a site which may contain more insight on obscure transmission swaps. Where did you get a skoda box on this side of the planet anyway?
-
I got it from UK. It was on a Fabia VRS 2004 PD130