VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: steevz on November 14, 2011, 01:13:11 pm

Title: Looking for someone with IDI timing tools around Abbotsford, BC
Post by: steevz on November 14, 2011, 01:13:11 pm

Sorry guys, didn't know what forum to post this in. I am in need of a dial indicator for loan or rent in the Abbotsford area of BC, Canada.

Thanks. If posted in wrong location, please move.

Title: Re: Looking for someone with IDI timing tools around Abbotsford, BC
Post by: trav1856 on November 15, 2011, 03:28:12 pm

I'd lend ya mine, but I'm in Oklahoma

Title: Re: Looking for someone with IDI timing tools around Abbotsford, BC
Post by: steevz on November 16, 2011, 10:52:33 am

lol, thank for the offer anyways.  :)

Title: Re: Looking for someone with IDI timing tools around Abbotsford, BC
Post by: Mark(The Miser)UK on November 18, 2011, 05:37:10 am

You could always use a 8mm x 1mm pitch bolt screw in with engine off TDC like a gauge zeroing procedure, and then unscrew 1 turn and you have your 1mm  timing.

Gently advance engine until pump hits the screw.

If not at TDC then back off engine and adjust pump, and recheck