VWDiesel.net The IDI, TDI, and mTDI source.

General Information => General => Topic started by: R.O.R-2.0 on October 23, 2011, 03:03:26 pm

Title: Just an idea..
Post by: R.O.R-2.0 on October 23, 2011, 03:03:26 pm

so, do you think we could take the 1.8 16v oil pump, drive gear, and gear retainer/cover plate, and install them in our diesels to have a OEM vacuum pump delete?

the oil pumps that came factory in cars with manual brakes, they also had the same splined drive as the 16v pumps. i have one of these oil pumps, just not the drive gear or the hold down for it..

Title: Re: Just an idea..
Post by: truckinwagen on October 23, 2011, 03:38:01 pm

gasser drive gears are cut the opposite direction than diesels( for the reverse spinning IM shaft)

Title: Re: Just an idea..
Post by: R.O.R-2.0 on October 23, 2011, 03:47:09 pm

Quote from: truckinwagen on October 23, 2011, 03:38:01 pm

gasser drive gears are cut the opposite direction than diesels( for the reverse spinning IM shaft)

GAAAHHH!!!

forgot about that.. i used to be the one that pointed it out that the diesel im shaft spins in reverse rotation from the gasser unit..