VWDiesel.net The IDI, TDI, and mTDI source.
General Information => General => Topic started by: rabbitman on September 09, 2011, 07:49:48 pm
-
For some reason my two rear ones (front suspension) are pitted pretty bad so I thought I'd throw new ones at it.
The part # is N 100 874 03 but I can't find anything online about it other than more people looking for the same thing ::).
Thanks
-
Isn't the rear part of the table on a Rabbit held by a clamp?
or are you asking about a different model?
-
Isn't the rear part of the table on a Rabbit held by a clamp?
or are you asking about a different model?
yes.. the rear is held by a clamp, and it connects to studs on the unibody..
the FRONT of the control arm takes a special bolt tho..
-
oops, sorry guys, I'm talking about my '92 golf :-\.
These are the bolts that hold the rear of the control arm and the subframe to the body.
-
It's 12mm x 1.5 pitch and 74 mm long [however that may include the 2mm pointy unthreaded end]. If you can find them at a metric fastener supply, just make sure it's 10.9 or 12.5 grade
-
It's 12mm x 1.5 pitch and 74 mm long [however that may include the 2mm pointy unthreaded end]. If you can find them at a metric fastener supply, just make sure it's 10.9 or 12.5 grade
Yeah I figured that would be my option, thanks.