VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => TDI Engine -General Info => Topic started by: dieselherb1 on July 26, 2011, 07:50:55 am
-
Anyone used Veg injection Service nozzles? Where are they made?
-
I've used the .216 ones. They are made in China but I found them to work nicely. I had bought a set of .205 from prothe and they were not as good.
-
I also used the .216 from veg and was very impressed.
-
I tried a set from Prothe, ran 5000-7000 miles removed had them pop tested only 2 were marginal. I didn't get to witness the spray pattern. Veg Service won't reply to my question where are these made.
-
When it came to injectors I called performance diesel injection and had them build me Bosch injectors with .216 nozzles and I'm very impressed with them. I recommend them to anyone that's looking for an upgrade,
-
Even some of the bosch nozzles have questionable patterns,pressures and origins! If you go with a service at least you get the company standing behind their end product, but personally, i'm too cheap to do that and so long as the veg nozzles tested well i was happy, i had read previously all veg would say is the guidelines/controls under which they are manufactured. It lends you to draw your own conclusions but suspect Chinese origin.The nozzles themselves merely say veg injection service. I have to believe with some of the positive reviews i have read here on veg/smog that they are of better quality/durability than prothe!
-
There is a company on Ebay, calls itself dieselland performance USA. They say the nozzles they sell are made in their factory. Also they is a guy of EbayUK whos sells nozzles, he said they're made "in the states". Wondering same company? Also alot of discussion on calibrate or not(TDI injections) Spoke to a TDI Guru, he said as long as first pressure is 3000psi second should be okay? If not?