VWDiesel.net The IDI, TDI, and mTDI source.
General Information => Troubleshooting => Topic started by: trent77 on April 15, 2011, 03:33:44 pm
-
I can't believe I don't know this... here goes. I want to hook up my can of diesel purge to my supply and return line to and from the injection pump. which one is supply and which is return? i have one toward the drivers side and one toward the passenger side. which is which? Thanks
-
Ha ha... it actually doesn't matter much in the end since you just feed both ends into the can of dieselpurge and start 'er up. ;)
Having said that, the input is on the passenger side of the pump and the output is on the driver's side. Some people run a cheapo gas-line filter on the input side... probably not a bad idea.
-
Thanks Vince. I am planning on an inline filter just because it get pretty dirty on the return. When we do Benz' they already have the pre-filter there so I use it and then replace it when I'm done. Not the case on my VW. Thanks again. Trent
-
Good man... let us know how she runs when you're done. (http://img.photobucket.com/albums/v603/burnyourmoney/up1.jpg)(http://img.photobucket.com/albums/v603/burnyourmoney/up1.jpg)
-
just got the purge done. I had been having some slow start ups. Now I will let it cool and restart later to see if it helped. I'll let you all know.
Trent