VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: abnkeis on April 07, 2011, 07:35:52 pm

Title: FS 0.5mm (0.020") Oversize Pistons
Post by: abnkeis on April 07, 2011, 07:35:52 pm

****SOLD***I have a set of 4 brand new pistons - 1.6 TD Kolbenschmidt 0.5mm (0.020") over $ 320****SOLD*****

I also have a TD block that has been cleaned and bored for 2nd oversize pistons if interested.

Title: Re: FS 2nd Oversize Pistons
Post by: R.O.R-2.0 on April 08, 2011, 08:16:07 am

these are 1st over size..

2nd oversize is +1mm

Title: Re: FS 2nd Oversize Pistons
Post by: abnkeis on April 08, 2011, 08:23:44 am

I believe the book calls them second oversize, but yes it is the first size over stock. Sorry for the confusion.

Title: Re: FS .20 Oversize Pistons
Post by: R.O.R-2.0 on April 08, 2011, 08:34:41 am

well, there are no smaller oversize pistons, so i would call them 1st o/s atleast..

idk, there might be a .25mm o/s piston, but i doubt it.

Title: Re: FS .20 Oversize Pistons
Post by: 79rabbit4dr on April 08, 2011, 08:44:58 pm

.020" - twenty thousandths of an inch...
right?

or are there really .20" over-sized pistons around?

Title: Re: FS .20 Oversize Pistons
Post by: abnkeis on April 08, 2011, 08:53:24 pm

Yes these are .020 over, sorry I guess I need to work on my proof reading skills.

Title: Re: FS 2nd Oversize Pistons
Post by: R.O.R-2.0 on April 09, 2011, 12:25:52 pm

Quote from: libbybapa on April 08, 2011, 11:54:30 pm

Quote from: R.O.R-2.0 on April 08, 2011, 08:16:07 am

these are 1st over size..

2nd oversize is +1mm

The OP is correct.  Those are 2nd oversize.  1st oversize is .010" over or 76.73(4,5).  R.O.R. you are also kinda sorta correct as the .010" oversize pistons are not available as far as I know.  It is my understanding that they were used for early factory "remanufactured" engines and presumably used to correct flaws in the original engine manufacture that were minor enough to correct by boring slightly larger.  

wow, gotta have a pretty decent bore to have a .010" overbore clean it up.. then again, ive never seen .010" over pistons either..

Title: Re: FS 0.5mm (0.020") Oversize Pistons
Post by: abnkeis on April 23, 2011, 09:23:53 am

Need these gone!!!

Title: Re: FS 0.5mm (0.020") Oversize Pistons
Post by: abnkeis on May 09, 2011, 07:23:56 pm

Still Available!!!

Title: Re: FS 0.5mm (0.020") Oversize Pistons
Post by: b13bliss on May 12, 2011, 07:23:03 pm

If these include the rings, I'll take them.  Let me know.  thanks!

Title: Re: FS 0.5mm (0.020") Oversize Pistons
Post by: abnkeis on May 12, 2011, 08:21:59 pm

They do have rings, so if you want them they are yours!!!

Title: Re: FS 0.5mm (0.020") Oversize Pistons
Post by: sootyperry on May 15, 2011, 11:13:06 am

how much for the td block? with pistons and squirters?

Title: Re: FS 0.5mm (0.020") Oversize Pistons
Post by: abnkeis on May 15, 2011, 05:11:15 pm

Quote from: sootyperry on May 15, 2011, 11:13:06 am

how much for the td block? with pistons and squirters?

The pistons are sold sorry. I am open to any reasonable offers on the block.