VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => TDI Engine -General Info => Topic started by: blakgolf on January 17, 2006, 09:46:37 pm
-
so i won a clutch on ebay 2 mintues ago and big idiot that i am i check after on the spec website for the part #.
i have a 2000 and on the spec website the part # is sv492-2, for the 99.5 its sv942 only. i bought the 99.5, now i know that they have luk clutchs and i dont. can i still run this spec or im screwed?????????
the car was built in 03/00, is there a way to check without taking out the tranny if i have a luk or not?
-
you could swap a luk in your car any how..the fly wheels are the same....for better info on you car of car check out freds tdi site.. www.tdiclub.com
Enjoy,
Hope this helps you.
Deo
-
smog told me the flywheels were not the same. if they i can just run this right?
-
my bad.... if you have a dual mass flywheel then your clutch is different..grab a early tdi or a g60 flywheel and 228mm..when i had my 2001 i used a older g60 flywheel when i upgraded the clutch to a vr6 clutch.... I believe the early tdi with luk cluthc used teh 228 flywheel like a g60 and vr6
later
Deo
-
wowwwwwwwwwwwwwwwww are u positive of what ur saying cuz i feal like kissing u right now. i did want to run a g60 wheel but the deal on this thing was to good. if i can still use the g60 flywheel it would be perfect
-
mummn from what you said above it looks like the luk style clutch you bought will fit your extra g60 flywheel..i would try yo confirm some how though before i unbolted my tranny :)
Thanks
Deo