VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: R.O.R-2.0 on January 09, 2011, 10:56:47 am

Title: Intercooler install! (mazda millenia unit on rabbit)
Post by: R.O.R-2.0 on January 09, 2011, 10:56:47 am

so, i got a tiny little intercooler off a mazda millenia yesterday. its the perfect size to fit on the passenger side of the radiator.. but it is a bit small, size wise, but better than nothing if you ask me..

core dimensions are 9" tall, 4" wide, and 2.5" thick..

overall dimensions are only a little more than that. with the charge piping hook ups and all that its about 15" tall..

Title: Re: Intercooler install! (mazda millenia unit on rabbit)
Post by: R.O.R-2.0 on January 09, 2011, 11:59:56 am

it doesnt fit.. well, easily atleast..

and im not notching my core support for a temporary intercooler..

i guess this one was just a waste of time and money..

i would cut the inlet and outlet off and make them straight, but its such thin metal, and i dont have a tig torch.

Title: Re: Intercooler install! (mazda millenia unit on rabbit)
Post by: Powered by Spearco on January 09, 2011, 12:40:15 pm

Post some pics of the intercooler.

Title: Re: Intercooler install! (mazda millenia unit on rabbit)
Post by: R.O.R-2.0 on January 09, 2011, 01:01:28 pm

its the one right up front, with the little plastic cover on it.
(http://i702.photobucket.com/albums/ww28/Dubsmoke/1848_1-300x225.jpg)