VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: GEE-BEE on January 06, 2011, 07:09:05 pm

Title: Coolant Hose Mod for 1.9 AAZ , ( Aftermarket Oil Cooler Install )
Post by: GEE-BEE on January 06, 2011, 07:09:05 pm

Iam going to make a mandrell to remove the outlet hose to the factory oil cooler

VW Hose part # 037122058

This will make the removal of the factory oil cooler , as this new hose will take the coolant from the hardline to the pump with no connector to the oem oil cooler.

the other hose for this application is 068121053 E ( pump to head )

If you want to use a remote oil cooler filter, instead of the oem , these two hose assy's make it easier

Part # GB037122058-MOD
1 Piece silicone design, 5 ply

Delivery 1 week

Title: Re: Coolant Hose Mod for 1.9 AAZ , ( Aftermarket Oil Cooler Install )
Post by: tdihuntdawg on January 06, 2011, 08:11:19 pm

do you have any photos?

Title: Re: Coolant Hose Mod for 1.9 AAZ , ( Aftermarket Oil Cooler Install )
Post by: Grey_Smoke on January 06, 2011, 11:06:40 pm

yes, pictures would be very nice.

Title: Re: Coolant Hose Mod for 1.9 AAZ , ( Aftermarket Oil Cooler Install )
Post by: GEE-BEE on January 07, 2011, 07:37:54 am

Just look at the stock pic, remove the center hose that goes to the oem cooler
Iam going to make a black and red next week

Send me a email and I will send you a pic

[email protected]

Title: Re: Coolant Hose Mod for 1.9 AAZ , ( Aftermarket Oil Cooler Install )
Post by: theman53 on January 07, 2011, 08:24:08 am

I love you...no homo. I was going to grab a set of your hoses for my 1.6. Then it hosed me.

I have to do the entire bucket of front end stut parts. I was going to do coilovers, but chickened out, plus I need it done this weekend. So I will have new BJ's :D, control arms, and all that to have a smooth nice ride.

Some day I will have a good set of hoses. Especially now that I won't have to plug the line for the stock oil cooler.

Title: Re: Coolant Hose Mod for 1.9 AAZ , ( Aftermarket Oil Cooler Install )
Post by: GEE-BEE on January 07, 2011, 08:38:05 am

I knew if I built it they would come.....

That's the funny thing , I figure if I need there must be others doing the same mod, Just a solution
36.00 with the two clamp's

GB

Title: Re: Coolant Hose Mod for 1.9 AAZ , ( Aftermarket Oil Cooler Install )
Post by: RabbitJockey on January 08, 2011, 04:24:44 pm

(http://img.photobucket.com/albums/v306/Trev0rbr/geebee/037122058.jpg)

Title: Re: Coolant Hose Mod for 1.9 AAZ , ( Aftermarket Oil Cooler Install )
Post by: GEE-BEE on January 08, 2011, 05:06:36 pm

Thanx Trevor

Th large hose on the top of the pic , actually goes to the waterpump , Iam deleting the center hose that attaches to the OEM cooler, the other end connects to the coolant hardline