VWDiesel.net The IDI, TDI, and mTDI source.

General Information => General => Topic started by: arnold on October 24, 2010, 12:03:56 pm

Title: picture of sliced aaz head
Post by: arnold on October 24, 2010, 12:03:56 pm

Anyone has a pic showing where the water jacket is in relation to the exhaust port (aaz)

ps:I've tried the search :P

Title: Re: picture of sliced aaz head
Post by: theman53 on October 24, 2010, 12:46:44 pm

I know Vince Waldon had a pic of a head cut in half somewhere. I don't know which it was 1.6 or 1.9.

It may have even been on the other site vwdieselparts or something like that.

Title: Re: picture of sliced aaz head
Post by: Vincent Waldon on October 24, 2010, 02:58:42 pm

This may be what you're thinking of... probably doesn't show the details the OP is after though:

(http://i197.photobucket.com/albums/aa85/vwaldon/cut-away.jpg)

If I could find someone local with a good bandsaw I've got a great donor head that was pressurizing the coolant due to a couple very small cracks between the valves and the prechamber... hmmmm.

Title: Re: picture of sliced aaz head
Post by: arnold on October 24, 2010, 03:19:47 pm

WOW Vince that's a nice pic ! (save,set as desktop image)  :P
How the hell did you cut that iconel precup in half,you have a source for alien laser technology ?

Sadly it doesn't shows the port enough,well there's a cracked head lying around here,i need it fast so i might attack it with my grinder and do the rest with the good old hand saw  ;D

Title: Re: picture of sliced aaz head
Post by: rallydiesel on October 24, 2010, 03:32:59 pm

I've never seen that one before. Very cool pic!

Title: Re: picture of sliced aaz head
Post by: Powered by Spearco on October 24, 2010, 10:01:33 pm

Did you knowtice the oil ring  ::). Looks more like a referance for injector, pre-cup and glow plug.

Title: Re: picture of sliced aaz head
Post by: smutts on October 25, 2010, 07:22:43 am

Quote

Did you knowtice the oil ring  Roll Eyes

She might have burnt a bit of oil, good compression though. ;D

Title: Re: picture of sliced aaz head
Post by: R.O.R-2.0 on October 25, 2010, 10:08:54 am

Quote from: Powered by Spearco on October 24, 2010, 10:01:33 pm

Did you knowtice the oil ring  ::). Looks more like a referance for injector, pre-cup and glow plug.

whats it got? 3 compression rings? and its not a VW piston either, cause the comp rings on a vw are spaced far apart from the scraper and oil rings.. and there in a steel ring land too.

Title: Re: picture of sliced aaz head
Post by: rabbitman on October 25, 2010, 10:37:28 pm

I bet it's a vw head on a different block. No hg either. The top of the piston looks rather strange too.

Title: Re: picture of sliced aaz head
Post by: R.O.R-2.0 on October 26, 2010, 07:07:36 am

yea, its definitely not on the right block. the deck should hold the pre cup in more than that.. it should cover almost half the pre cup.

Title: Re: picture of sliced aaz head
Post by: arnold on October 29, 2010, 12:17:49 pm

Here it is,this is cil nr1 exhaust.

As you can see the lower side is quite beefy,the side's after the bowl are THIN,where the oil drains are the wall is no more then 2mm  !
I have a lot more pic's at different angles so if you want something just ask

(http://img152.imageshack.us/img152/5848/sam0746original.jpg) (http://img152.imageshack.us/i/sam0746original.jpg/)

the red line shows the bump i removed