VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => TDI Engine -General Info => Topic started by: dieselherb1 on October 12, 2010, 04:57:05 pm

Title: Replacing dual mass flywheel?
Post by: dieselherb1 on October 12, 2010, 04:57:05 pm

I've got a engine from a 01 Beetle it has a dual mass flywheel. I'm installing into a 00 Jetta, don't know what flywheel it has, but want to use solid flywheel. Easy swap?

Title: Re: Replacing dual mass flywheel?
Post by: rallydiesel on October 12, 2010, 05:29:27 pm

You will need the G60 flywheel. I don't know what size clutch the A4 has but you will probably need a VR6 clutch to match up with the G60 flywheel.

Title: Re: Replacing dual mass flywheel?
Post by: Powered by Spearco on October 12, 2010, 09:39:33 pm

The G60 FW and VR6 FW are 228mm. The VR6 PP and disc are a direct swap into a 4cyl. 02A/02J trans. using a G60 FW.  :)
As far as the swap goes, yes. Other than the special socket for the DM FW. I think its a 10 or 12 tripple square.

Title: Re: Replacing dual mass flywheel?
Post by: Syncroincity on October 12, 2010, 09:50:29 pm

Check Ebay for solid flywheel & clutch packages, search tdi flywheel.

Title: Re: Replacing dual mass flywheel?
Post by: Powered by Spearco on October 12, 2010, 10:13:16 pm

ECS Tuning has a couple of G60 FW's. Stock and lightened fairly cheap.

Title: Re: Replacing dual mass flywheel?
Post by: dieselherb1 on October 13, 2010, 08:04:33 pm

What is the difference between the G60 flywheel and the 1Z-AHU?

Title: Re: Replacing dual mass flywheel?
Post by: Powered by Spearco on October 13, 2010, 10:35:05 pm

The G60 and the AHU transmissions are cable shift. The 1Z, I'm not sure of what type of trans they came with?

Title: Re: Replacing dual mass flywheel?
Post by: dieselherb1 on October 14, 2010, 04:49:59 pm

The 1Z is the same as the AHU, cable shift.

Title: Re: Replacing dual mass flywheel?
Post by: Powered by Spearco on October 14, 2010, 11:13:38 pm

Ya learn something every day. Thanks.