VWDiesel.net The IDI, TDI, and mTDI source.
For Sale/Looking For => Parts for Sale/Wanted => Topic started by: abnkeis on September 30, 2010, 07:26:46 pm
-
I was in the process of rebuilding my Jetta, but don't have the time to finish.
I have a 1.6td block cleaned, bored and honed for second oversize pistons.
I have a brand new set of second oversize pistons.
Fully rebuilt head.................SOLD
Complete turbo set up.................SOLD
Good Injection Pump
New Rod Bearings
New Main Bearings
Intermediate shaft that has been turned down (lobe machined off) and balanced......SOLD
Custom 2.5" mandrel bent downtube and exhaust...............SOLD
Bilstein Shocks
Car itself is black with virtually no rust
Engine and Tranny are removed.
Everything is available that is on the car.
I also have a parts car that has the engine still in it, but was told the head gasket went out.
It has a turbo block.
I have pulled a few parts, such as: belts, AC, valve cover, IP. all are still available just not installed.
Car itself is white with just a few small rust spots.
Also have several small intercoolers
Anything you don't see listed just ask.
Block: 250
Head: 400.........SOLD
Turbo package: 350...........SOLD
Injector Pump from Running Engine: 275
Injector Pump with seal leak: 150
Custom Intermediate Shaft: 50.........SOLD
K24 Turbo: 200
The following I just bought new:
Pistons - 1.6 TD Kolbenschmidt .20 over (.5mm) $ 340
Mains (glyco) = 50
Rod bearings = 26
Thrust washers = 17
Set of 10 bottom end stretch bolts that are to be replaced = 30.......SOLD
int shaft bearings = 35
Looking for best offer on these new parts.
http://keis779.fileave.com/Parts_1.jpg (http://keis779.fileave.com/Parts_1.jpg)
http://keis779.fileave.com/Parts_10.jpg (http://keis779.fileave.com/Parts_10.jpg)
http://keis779.fileave.com/Parts_11.jpg (http://keis779.fileave.com/Parts_11.jpg)
http://keis779.fileave.com/Parts_12.jpg (http://keis779.fileave.com/Parts_12.jpg)
http://keis779.fileave.com/Parts_13.jpg (http://keis779.fileave.com/Parts_13.jpg)
http://keis779.fileave.com/Parts_16.jpg (http://keis779.fileave.com/Parts_16.jpg)
http://keis779.fileave.com/Parts_2.jpg (http://keis779.fileave.com/Parts_2.jpg)
http://keis779.fileave.com/Parts_3.jpg (http://keis779.fileave.com/Parts_3.jpg)
http://keis779.fileave.com/Parts_4.jpg (http://keis779.fileave.com/Parts_4.jpg)
http://keis779.fileave.com/Parts_7.jpg (http://keis779.fileave.com/Parts_7.jpg)
http://keis779.fileave.com/Parts_9.jpg (http://keis779.fileave.com/Parts_9.jpg)
-
PM'ed you on Friday morning regarding some of the parts.
-
any chance you have a DSM intercooler? one out of a 1st gen eclipse? or anything similar? any that are completely metal? not interested in plastic tanked units..
-
I do have one intercooler that is all aluminum. I believe it is from a SAAB. I can send pics or try to post some later.
-
Very interested in that exhaust and downtube. setup
Got any picks of it?
Will actually be traveling to KS in november too.
-
I also got a list of stuff that I need:
Alternator (Bosch w/ "W" terminal)
Drivers side Mirror With door control cable
Radiator fan Motor (4 terminal motor) with the pigtail
Looking for a intercooler setup.
E-mail me at [email protected]
-
I also got a list of stuff that I need:
Alternator (Bosch w/ "W" terminal)
Drivers side Mirror With door control cable
Radiator fan Motor (4 terminal motor) with the pigtail
Looking for a intercooler setup.
E-mail me at [email protected]
Just posted pics for the Downtube (#16 pic I believe)
I will be checking on the rest of your list tomorrow.
-
holy crap...local diesel parts?? I dont have to smuggle out of Kanada??
Might have to talk about the head/downpipe/turbo
I live south of Lawrence. Text is best since its always noisy where Im working. Thing is Im going to California for a week this Friday.
PM Sent with number
-
I'm interested in the block with pistons. I live near Lawrence and have no problem comin out that way for some parts. PM me a phone # so we can talk.
Thanks,
Aaron
-
Prices added!!!
-
Do you have airbox and snorkel(?) to turbo and the turbo to manifold elbow? I'm adding a turbo to a NA so not necessarily trying to match something.
Shipping to 98837 if you have any of this.
Rod
-
I do have the snorkel, but I'm trying to keep it as part of the set with the turbo and manifold right now.
-
Do you have a gauge cluster with a tach?
-
is the turbo a k14 and if so how much for the turbo alone shipped to Griffin, GA. 30223 please email me at [email protected] thanks Lamar
-
pm SENT
-
Just wondering if you still have the saab 900 intercooler laying around? Thanks, Paolo
-
It just happens to be one of the few parts that I have left!