VWDiesel.net The IDI, TDI, and mTDI source.

General Information => General => Topic started by: srgtlord on June 26, 2010, 09:50:13 pm

Title: Belt size for 1.9td serpentine setup non ac
Post by: srgtlord on June 26, 2010, 09:50:13 pm

Alright I have a serpentine setup from a 1.9td on my 1.6d and the belt that I purchased is waaay too small. ANy ideas on what size belt?

Title: Re: Belt size for 1.9td serpentine setup non ac
Post by: srgtlord on June 28, 2010, 03:27:01 pm

FOUND IT!!!!! I asked a guy on youtube and he repied that he was using the Contitech Multirib 6PK 1045

Title: Re: Belt size for 1.9td serpentine setup non ac
Post by: GEE-BEE on July 05, 2010, 11:39:29 am

MINE, NON A/C, SPRING PLUNGER TYPE WAS 6PK923

Title: Re: Belt size for 1.9td serpentine setup non ac
Post by: srgtlord on July 10, 2010, 01:06:00 pm

The belt needed was 1045 for mine. Now I just need to put the transmission back on the damn thing :)