VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => TDI Engine -General Info => Topic started by: smoken u on June 01, 2010, 03:51:40 pm

Title: hmmmmmm
Post by: smoken u on June 01, 2010, 03:51:40 pm

quick flywheel question me and my friend got a singe mass flywheel off of a 2003 2.0L becuase the machine shop screwed the dual mass that was on it, it was mentioned that this flyweel would fit the crank pattern on a 2003 TDI i just want to make abolutely sure,as the crank is at the machine shop adn the flywheel is here, and while i can still take it back if its wrong, also comparing it to the dual mass it is physically smaller, Im hoping that this will hold up still against some minor mods lol

Title: Re: hmmmmmm
Post by: redneck_vdub on June 01, 2010, 05:03:50 pm

It was an 01 2L

Title: Re: hmmmmmm
Post by: lord_verminaard on June 02, 2010, 07:36:39 am

Same bolt pattern.  Single-mass flywheels are capable of holding a lot more torque than the dual-mass ones.

Brendan

Title: Re: hmmmmmm
Post by: smoken u on June 02, 2010, 01:53:08 pm

oops wrong year there thanks redneck lol friggen MKIV's they all look the same..... :P