VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: 92EcoDiesel Jetta on April 24, 2010, 07:31:41 am
-
I haven't posted in a while. Jetta is running well & tach is doing fine.
I need to replace the shifter boot. How do I get the shift knob off? I tried turning it but it didn't give. What's the trick. TIA!
-
Turn it counter clockwise...maybe a towel and channel locks?
-
It's screwed on there. If it won't give, wrap a rag around it and grab it some channel locks and turn.
-
Turn it counter clockwise...maybe a towel and channel locks?
Hey what the...?
-
looks like I was about 50 seconds ahead of you LOL
-
If the towel + channelock pliers combo still slips too much, try just wrapping the jaws of the pliers with electrical tape (use plenty of it, no towel).
-
make sure its not one of those ones that has set screws holding it on. one of the universal kind you get at wal mart i mean.
-
Thanks for the replies! I used a strap wrench and it came off after a couple of tries. It was on pretty tight and my (weak) bare hands was not strong enough apparently. Anyway the knob needed no protection from the rubber strap.